Chameleon Lens Coloring Spray Film

Installation Notes

• Installation Difficulty: SIMPLE (No Tools, Anyone Can Install)
• Apply this film at room temperature for best results.
• Prior to application, ensure the surface that the product is to be applied to is clean.
• Mask off the area around your lenses to protect your vehicle from over spray.
• One coat of this product is recommended, so ensure you achieve full coverage.
• Please allow 12 hours for the product to fully cure before exposing it to harsh environments.
• If you find that you need to remove the product from the sprayed surface, it is best to wait until the film is completely dry (24 hours).
• Simply lift a corner and peel off the entire coating.

Notes / Warnings

• This product utilizes a compressed propellant. Always provide adequate ventilation during the application process.
• You will need to separately purchase a standard can of compressed air, usually sold in office supply stores as dust cleaner, to serve as the propellant to spray the liquid onto the surface of your lens.
• When purchasing the can of compressed air, select a brand that offers the stem on the can. Pull off the nozzle and there should be a small stem protruding from the valve at the top of the can.