Carbon Fiber Vinyl Door Sills for BMW E90 M3
DecalWerks
DSO90M1YY
BMW-E9X-3-Series-2009BMW-E9X-3-Series-2010BMW-E9X-3-Series-2011BMW-E9X-3-Series-2012Exterior Decals
Product Introduction
- Give your BMW door sills a carbon fiber finish with this easy to install overlay kit!
- Only works on BMW E90 M3 - Does Not Include M3 Logo!
Features and Benefits Of This Product
- Enjoy the look with Carbon Fiber with these Carbon Vinyl Door Sills.
- Simply overlay on top of your original sills for an immediately sportier look every time you drive.
- Each kit comes with 4 pieces for your BMW.
Installation Notes
- Installation Difficulty: SIMPLE (No Tools, Anyone Can Install)
- Ensure to remove any shine products that may have previously been applied to the door sills, along with any oil and dirt, with rubbing alcohol.
- Failure to properly prepare the area will result in poor adhesion.
- We recommend the use of soapy water for easy and accurate placement.
- Put soapy water on the application surface AND on the back of the piece itself.
- Once you are satisfied with the placement, gently press out the water with a cloth.
- As the material's adhesive is heat activated, we recommend using a hairdryer or heat gun to evaporate the excess water and enhance adhesion.
- If you find a portion is not sticking correctly, this indicates that there is still air or water under that piece.
- Simply push any bubbles to the edges, and you're done.
Notes / Warnings
- Use caution when peeling off or realigning to avoid stretching the material, or it will not fit correctly.
- This is especially important with narrow or long pieces.
- If the piece stretches it will most likely happen along a long thin area leaving you with excess material somewhere in the middle of the pattern.
- If this occurs make a cut in the material with scissors, and fold over the two edges you just created by cutting the one piece.
- Cut away any overlap and press down firmly.