Carbon Fiber Vinyl Door Sills for BMW E92/E93 M3


  • $24.50

Product Introduction

  • Give your BMW door sills a carbon fiber finish with this easy to install overlay kit!
  • Only works on BMW E92/E93 M3 - Does Not Include M3 Logo!

Features and Benefits Of This Product

  • Enjoy the look with Carbon Fiber with these Carbon Vinyl Door Sills.
  • Simply overlay on top of your original sills for an immediately sportier look every time you drive.
  • Each kit comes with 2 pieces for your BMW.

Installation Notes

  • Installation Difficulty: SIMPLE (No Tools, Anyone Can Install)
  • Ensure to remove any shine products that may have previously been applied to the door sills, along with any oil and dirt, with rubbing alcohol.
  • Failure to properly prepare the area will result in poor adhesion.
  • We recommend the use of soapy water for easy and accurate placement.
  • Put soapy water on the application surface AND on the back of the piece itself.
  • Once you are satisfied with the placement, gently press out the water with a cloth.
  • As the material's adhesive is heat activated, we recommend using a hairdryer or heat gun to evaporate the excess water and enhance adhesion.
  • If you find a portion is not sticking correctly, this indicates that there is still air or water under that piece.
  • Simply push any bubbles to the edges, and you're done.

Notes / Warnings

  • Use caution when peeling off or realigning to avoid stretching the material, or it will not fit correctly.
  • This is especially important with narrow or long pieces.
  • If the piece stretches it will most likely happen along a long thin area leaving you with excess material somewhere in the middle of the pattern.
  • If this occurs make a cut in the material with scissors, and fold over the two edges you just created by cutting the one piece.
  • Cut away any overlap and press down firmly.

We Also Recommend